Kärcher RCV 5 Vacuum Cleaner White

Hard floors and low-pile carpets are independently and systematically cleaned by the RCV 5 Robot Vacuum Cleaner Dry dirt is transported into the built-in waste container by the rotating brush, the side brush for the edges and the fan. The ultrasonic sensor detects carpets that would be better cleaned using the Auto Boost function. The RCV 5 doesn't just vacuum but can also wet mop, automatically avoiding carpet when in mopping mode. Via the app, the RCV 5 will automatically create a map of the rooms by detecting the surroundings (LiDAR).

Individual cleaning parameters can be set for every room - simply select which rooms should be vacuumed, mopped or not cleaned. Thanks to the dual-laser system with camera, the RCV 5 also detects and avoids flat obstacles such as cables, socks or shoes, whilst additional sensors prevent the device from falling. For cleaning, you can conveniently start the RCV 5 via the app, use a preset individual schedule or press a button on the device to start your cleaning. Voice output of the device will provide the most important information and status.

The dual-laser sensor and camera on the robot allow it to recognise small objects that are too small for the LiDAR navigation system (e.g. shoes, socks or cables) and then overlays these on the map in the app. If it detects an obstacle, it uses intelligent navigation manoeuvres to bypass them and avoid getting stuck.

The fall sensors reliably prevent the RCV 5 from falling down steps or drops. If a large drop is detected, the controller receives a signal triggering the robot to turn around.

Always well informed: the RCV 5 uses voice output to provide important information and share the current status. Whether the machine needs help or a service, in most situations it will tell you via voice output.